Accessories

A5E01053558 SIMATIC S7-300, FRONT DOOR INCREASES FOR 32-CHANNEL SM PREPARED FOR THE CONNECTION FROM 1.3 MM2/16 AWG CONDUCTORS 5 UNITS PER PACKING UNIT

SIMATIC S7-300, RAIL L=480MM

SIMATIC S7-300, RAIL L=530MM

SIMATIC S7-300, RAIL L=830MM

SIMATIC S7-300, FRONT CONNECTOR FOR 6ES7331-7SF00-0AB0, TO IMPROVE THE ACCURANCY OF THERMOCOUPLE MEASUREMENT IN MODE INTERNAL COMPENSATION

SIMATIC S7-300, LABELING STRIPS FOR F MODULES (SPARE PART), 10 UNITS PER PACKING UNIT

SIPLUS S7-300 ISOLATION MODULE - 25...+ 60 DGR C WITH CONFORMAL COATING BASED ON 6ES7195-7KF00-0XA0 . SEPARATOR MODULE BETWEEN F- AND STANDARD MODULES WITH REDUNDANT ET200M INTERFACE MODULES USE ONLY WITH SEPARATOR BUS MODULE

SIMATIC DP, BUS UNIT FOR ET200M FOR INTEGRATING 2 IM153-2 RED. FUNCTION: INSERT/REMOVE WHILE OPERATING MODE RUN

SIMATIC S7, SEPARATOR BUS MODUL BETWEEN F- AND STANDARD MODULES USE ONLY WITH SEPARATOR MODULE

SIMATIC S7-300, EXTENDED FRONT DOOR FOR SAFETY MODULES, ALLOWS CONNECTION OF 1.3 QMM OR 16 AWG WIRE SIZE 5 PIECES PER PACKAGING UNIT INCL. LABELING SHEETS AND WIRING DIAGRAM (YELLOW)

SIMATIC S7-300, RAIL L=160MM

SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS, 20-POLE

SIMATIC S7-300,FRONT CONNECTOR WITH SCREW CONTACTS, 40-PIN

SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SPRING CONTACTS, 20-PIN

SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SPRING CONTACTS, 40-PIN

S7-300, TERMINAL BLOCK WITH SPRING-LOAD TERMINALS FOR 64 CHANNEL MODULES OF S7-300, 2 PIECES PER PACKAGING UNIT

SIMATIC S7-300, LABELING STRIPS (SPARE PART),FOR SIZE WITH 40-POLE FRONT CONNECTOR, 10 UNITS PER PACKING UNIT

S7-300 CONNECTING CABLE FOR 64 CHANNEL MODULES, LENGTH: 2.5M 2 PIECES PER PACKAGING UNIT

SIMATIC S7-300, CABLE GUIDE LK 393 FOR EX (I) MODULES CONNECTIONS L+ AND M ARE INTRINSICALLY SAFE THE TERMINALS FED IN, 5 UNITS PER PACKING UNIT

FRONT CONNECTOR WITH TWISTED RIBBON CABLE CONNECTION FOR 16 DIGITAL I/O MOD. OF THE S7-300, POWER SUPPLY VIA SCREW-TYPE TERMINALS