AS-I

AS-I COMPACT MODULE K45 DIGITAL 4 DQ, IP67 4 X OUTPUT, 1 A 24 V DC MAXIMAL 3 A FOR ALL OUTPUTS 4 X M12 SOCKET MOUNTING PLATE 3RK1901-2EA00 OR 3RK1901-2DA00 MUST BE ORDERED SEPARATELY

AS-I COMPACT MODULE K60 ANALOG 2 AQ, IP67 2X 1 OUTPUT, VOLTAGE +/- 10 V 1..5 V FOR 2-WIRE ACTUATORS 2 X M12 SOCKET MOUNTING PLATE 3RK1901-0CA00 MUST BE ORDERED SEPARATELY

AS-I COMPACT MODULE K60 DIGITAL 8 DI, IP67 8 X INPUTS, MAXIMUM 200 MA 8 X M12 SOCKET Y-II ASSIGNMENT MOUNTING PLATE 3RK1901-0CA00 MUST BE ORDERED SEPARATELY

AS-INTERFACE MOUNTING PLATE K60 FOR COMPACT MODULES K60 FOR WALL MOUNTING FOR 2 FLAT CABLES AS-I CABLE (YELLOW) AND AS-I CABLE 24 V (BLACK)

SIMATIC ET 200SP COMMUNICATION MODULE CM AS-INTERFACE MASTER ST ACCORDING TO AS-I SPECIFICATION V3.0

AS-I POWER 3A 120 V/230 V AC AS-INTERFACE POWER SUPPLY UNIT, IP20 IN: 120 V / 230 V AC OUT: AS-I, 3 A (30 V DC), IP20 WITH INTEGRATED GROUND FAULT DETECTION, WITH INTEGRATED OVERLOAD DETECTION WITH AS-I DATA DECOUPLING

AS-I POWER 5A 120 V/230 V AC AS-INTERFACE POWER SUPPLY UNIT, IP20 IN: 120 V / 230 V AC OUT: AS-I, 5 A (30 V DC), IP20 WITH INTEGRATED GROUND FAULT DETECTION, WITH INTEGRATED OVERLOAD DETECTION WITH AS-I DATA DECOUPLING

AS-INTERFACE !!! PHASE-OUT PRODUCT !!! FOR FURTHER INFORMATION PLEASE CONTACT OUR SALES STAFF! SAFETY AT WORK SLIMLINE S22.5F STANDARD IP20 2F-DI

SLAVE 1: ASISAFE COMPACT MODULE K45F, IP67, DIGITAL, 4F-DI, 4 X SAFE INPUT CAT. 1/2 OR 2 X SAFE INPUT CAT. 3/4 (CAT.: SAFETY CATEGORY ACCORDING TO EN 954-1); 4 X M12 SOCKET. MODULE USES 2 AS-I ADDRESSES. MODULE IS ASSIGNED TO 2 AS-I ADDRESSES. MOUNTING PLATE 3RK19012EA00 TO BE ORDERED SEPARATELY.

AS-INTERFACE SLIMLINE MOD. S45, !!! PHASE-OUT PRODUCT !!! FOR FURTHER INFORMATION PLEASE CONTACT OUR SALES STAFF! DIGITAL,4I/4O,POTENT.-FREE,IP20 4 X 1 INPUT, 200MA, PNP 4 X 1 OUTPUT, 1A, DC 24V CAGE-CLAMP, MODULE WIDTH 45 MM

SOFTWARE FOR CONFIGURING THE APPLICATION IN THE SAFETY MONITOR

AS-INTERFACE, BLANK PLUG M12, FOR MODULES IP 67, 10 PCS. PER PACKING UNIT

CABLE CLIP FOR CABLE ADAPTER RIBBON CABLE

SEALING FOR MOUNTING PLATE TO SEAL OFF THE HOUSING IF THE TRAPEZ.-SECTION CABLES ARE ENTERED AT ONE SIDE ONLY, CONSISTS OF 2 SEALS (1 NORMAL + 1 THREADED)

CONNECTOR SET, SUPPLY 6X2.5 MM2, 9-POLE, COMPLETE, WITH PG16 CABLE ENTRY

CONNECTOR SET, SUPPLY 6X4 MM2, 9-POLE, COMPLETE, WITH PG16 CABLE ENTRY

CONNECTOR SET, MOTOR SUPPLY 8X1.5 MM2, 9-POLE, COMPLETE, WITH PG16 CABLE ENTRY

POWER CONNECTION CABLE 4X4 MM2, 0.15 M, 9-POLE FOR ET200X EM300 AND AS-I COMPACT STARTER

65MM TERMINAL BLOCK PEN FOR ET200S HIGH FEATURE STARTER, WITH CONN. FOR SUPPLY CABLE AND LOADS

EET 200PRO MS/RSM CONNECTOR SET SLEEVE HOUSING ANGLED HANQ4/2 WITH PIN INSERT 2.5MM2 FOR POWER TRANSMISSION INCLUDING CABLE GLANDS